Transformateurs

SE110 MOUNTINGS

The SE110 is a remarkable antivibratory product : Better than 90% insulation at 1.500 rpm (25 Hz). Constant height over wide load range. Stabilised characteristics during Service Life.

€11.73 HT

€14.08TTC

Supports Paulstraflot

€143.68 HT

€172.42TTC

SE117 MOUNTINGS

The SE117 mounting comprises one piece elastomer bonded to a top and bottom plate.

€37.22 HT

€44.66TTC

SUPPORTS SEV1786

This suspension system is particularly suitable for mounting exhaust pipes from generator sets on board ship or permanently mounted in buildings.

€61.07 HT

€73.28TTC

SE120 MOUNTINGS

The SE120 mount is made of a round metal cushion covered with an anti-slip elastomer pad on both side.

€37.81 HT

€45.37TTC

SE131 MOUNTINGS

The SE131 mountings steel have a mounting plate, cover and swaged teel shaft. This mouting is available with stainless steel or mild steel zinc plated metalwork. The resilient parts are stainless steel wire cushions. The steel parts are zinc plated.

€165.02 HT

€198.02TTC

SE122 MOUNTINGS

Low profile mountings with high static and dynamic load range : 100% 316 stainless steel Natural frequency from 15 to 18 Hz Dynamic load in compression : 3 g

€296.82 HT

€356.18TTC

SE114 MOUNTINGS

he SE114 mounting comprises one or more layers of elastomer bonded to flat, parallel metallic plates. These mountings may be cylindrical or rectangular. They are designed to withstand very high compressive loads. The range of mechanical characteristics is governed by the hardness of the rubber and the number of intermediate metallic plates.

€494.33 HT

€593.20TTC

SE121 MOUNTINGS

Standard SE121 mountings have a cast steel base and a resilient element made from a stainless steel wire cushion.

€67.41 HT

€80.89TTC

SE125 MOUNTINGS

The SE125 mountings have a cast iron cover and base with 4 mounting holes in the base and a central tapped hole in the cover.

SE123 MOUNTINGS

Machine mount available with a stud or threaded hole. Top cup and stud are mild steel zinc plated. Stainless steel wire mesh cushion. Natural frequency between 15 to 20 Hz.

SE129 MOUNTINGS

All metal mounting comprising a stack of between one and three woven steel cushions giving a variation in natural frequency depending upon the number of cushions. This makes higher levels of isolation possible.